ATEX for Explosion-proof Environments

Are you looking for an intrinsically safe barrier? Should it be insensitive to electrical interference? Then the FMS ATEX module of the ExMGZ series is exactly the right product for you.

To the FMS ATEX models. 

Kraftaufnehmer und Verstärker für gasexplosionsgefährdete Bereiche.

Your advantages

  • ATEX certified
  • High precision, full sensor excitation voltage (100 %)
  • Two independent, intrinsically safe sensor inputs
  • Insensitive to electrical interference

Properties

  • Approval II (2) DG [EEx ib] IIB / IIC
  • Internal compensation of the voltage drops across the Zener barriers
  • For 1 or 2 force sensors
  • Power supply galvanically isolated

Our promise

  1. Reliability
  2. 100% compatible with all FMS products
  3. Maintenance-free operation
  4. Lowest life cycle costs

The FMS ATEX module. Approval 2 certified.

The ExMGZ series is suitable for use with all FMS force sensors in explosive environments classified as Class II (2) GD [EEx ib] IIB/IIC. The installation is easy. The device is connected between measuring amplifier or controller and force sensor. It can be used for single or dual channel measuring points with all FMS measuring amplifiers and web tension controllers. They are mounted in the control cabinet on DIN rails. All connections are realized as pluggable screw terminals. The power supply is galvanically isolated.

Use in explosive environments possible

FMS offers solutions suitable for applications in the following environments: 

  • Gas explosive atmospheres II (2) G [Ex ib Gb] IIC 
  • Category 3G (EPL Gc) with housing II 3 (2) G Ex nA [ib Gb] IIC T4 Gc 
  • Dust explosive atmospheres II (2) D [Ex ib Db] IIIC

FMS Force Sensors for explosive areas

All FMS force sensors are simple apparatus according DIN EN 60079. In combination with the associated, certified device ExMGZ100/200 they can be used for explosive areas. An additional marking of the force sensors (degree of protection, gas group, temperature class, etc.) cannot be applied according to IEC 60079-14, paragraph 16.4, Note 1 in these specific applications.

 

Function description

The module separates the circuit into an intrinsically safe area (force sensor) and a non-intrinsically safe area (amplifier or controller). Each line is provided with a Zener barrier. This limits the maximum power supplied. A controller circuit ensures that the voltage drop across the Zener barriers is compensated and thus the precise supply voltage is constantly applied to the force sensor.

Did you know?

Jump to content
Call support  (+41 44 852 80 80)
Contact expert