RMGZ300 – Compact force sensor for stranding machines with medium wire tension

RMGZ3
Features
  • Compensation of centrifugal and Coriolis forces
  • Nominal forces from 20 to 1000 N (4.5 to 225 lbf.)
  • Overload protection up to 10-times nominal force
  • Measuring range 30:1, accuracy class ±0.5 %

Designed to meet the requirements of planetary and tubular stranders, a force sensor of the RMGZ300-Series is also applicable to bunchers and twisters. The innovative dual flexion beam construction provides the foundation for accurate and reproducible measurements in difficult operating conditions. Once the load rating and housing configuration are properly specified for the application, the sensor is easily mounted to the machine with two fasteners. A single cable (power in / signal out) is connected at the sensor housing. Standard pulleys are not supplied by FMS.

General technical details

Sensitivity1,8 mV/V
Tolerance of sensitivity<± 0,2 %
Accuracy class± 0,5 %
Temperature coefficient± 0,1 %/10K
Temperature range-10 to 60 °C (14 to 140 F)
Input resistance350 Ω
Power supply1 to 10 VDC
Overload protection rating10 times nominal force
Material main bodyStainless steel
Protection classIP 40
Electrical connectionMale connector M16x0.75, 5-pole
Repeatability error0.05%
Measuring range30:1

Available sizes

SizesNominal forces in N Inner-ø pulley CAD dataWatchlist
RMGZ300A20, 50, 100, 200, 500, 100078 mm

Available options

SizesOptionDescriptionCAD dataWatchlist
RMGZ300A  
H14
right-angle connector in scope of supply, replaces straight connector
H21
electrical connection with PG gland with 5 m (16 ft.) cable, replaces connector
H23
additional 1 pcs. ball bearing 61812 in scope of delivery
H25
connector offset 180°
H28
red point offset 180°
H14.H15
combined options
H14.H23
combined options
H14.H28
combined options
H21.H28
combined options
H23.H25
combined options
H23.H28
combined options
H25.H28
combined options
H23.H25.H28
combined options

Option descriptions

NameDescriptionPicture
H14right-angle connector in scope of supply, replaces straight connectorH14H14
H21electrical connection with PG gland with 5 m (16 ft.) cable, replaces connectorH21H21
H23additional 1 pcs. ball bearing 61812 in scope of deliveryH23H23
H25connector offset 180°H25H25
H28red point offset 180°H28H28
H14.H23combined options
H21.H28combined options
H23.H25combined options
H23.H28combined options
H25.H28combined options
H23.H25.H28combined options
Jump to content
Call support  (+41 44 852 80 80)
Contact expert